USP 825 Radiopharmacy Cleanroom Certification Quotes
USP <825> covers preparing, compounding, dispensing and repackaging radiopharmaceuticals. Its PECs must be certified to ISO Class 5, and the classified areas and PECs must be certified initially and recertified at least every 6 months using the CETA guide, with airflow, HEPA leak, particle count and smoke tests. Request radiopharmacy certification quotes here.
Facilities anywhere in the U.S. can request quotes here.
What USP <825> certification is
USP General Chapter <825>, Radiopharmaceuticals—Preparation, Compounding, Dispensing, and Repackaging, became official on December 1, 2020. USP describes it as informational unless regulators or enforcement bodies apply it, so check what your state board and accreditor require.
Key facility points in <825>:
- The PEC must be certified to ISO Class 5 or better under dynamic conditions, with unidirectional HEPA-filtered air in the direct processing area
- A PEC for sterile compounding sits in an ISO Class 7 or better buffer area with an ISO Class 8 or better ante-room. Some work may be done in a segregated radiopharmaceutical processing area (SRPA).
- ISO 7 areas: at least 30 HEPA-filtered ACPH. ISO 8 areas: at least 20.
- Positive pressure of at least 0.02 in. w.c. between classified areas, while negative pressure for volatile or airborne radiopharmaceuticals follows the radioactive materials (RAM) license
- Certification of classified areas and PECs: initially and at least every 6 months, using the CETA certification guide or an equivalent guideline, including airflow testing, HEPA filter integrity testing, total particle counts and smoke pattern tests. Where a hot-cell or PEC configuration doesn't fit the CETA standards, other equivalent means of certification may be used and documented per facility SOPs.
- Viable air sampling during dynamic or simulated operations at least every 6 months
Who needs it
- Nuclear pharmacies and hospital nuclear medicine departments that prepare or compound sterile radiopharmaceuticals
- Sites with LAFWs, BSCs or hot-cells used as PECs
What to include in your quote request
- Facility address and type (nuclear pharmacy, hospital nuclear medicine)
- PECs by type (LAFW, BSC, hot-cell, isolator), with make and model
- Rooms: buffer area, ante-room, SRPA, with ISO classes
- Pressure plan (positive and negative rooms) and any RAM license constraints the tester must follow
- Whether viable air and surface sampling should be included
- Due date
Need quotes? Request quotes with one form →
Are you a certification or testing company? Join as a provider →
How getting quotes works here
- Send one request. Use the quote request form to describe your facility, where it is, the rooms or equipment, and the tests or standard you need.
- We share it with providers. Your request goes to certification and testing companies that cover your area and the type of work.
- Compare and choose. Providers that want the job send quotes. You compare scope and price side by side and pick who to hire, so you don't have to chase each company yourself.
Related
- USP 797 certification
- Environmental monitoring
- Laminar flow hood certification
- Biosafety cabinet certification
- Pressure differential testing
- Smoke studies
Requests are accepted nationwide. Browse locations.
FAQ
What is USP 825?
USP General Chapter <825> sets standards for preparing, compounding, dispensing and repackaging radiopharmaceuticals. It became official on December 1, 2020.
How often must a USP 825 PEC be certified?
Initially and at least every 6 months, along with the classified areas, using the current CETA certification guide.
What ISO class does a USP 825 hood need?
ISO Class 5 or better under dynamic operating conditions.
Does USP 825 use positive or negative pressure?
Both can apply. Sterile areas use at least 0.02 in. w.c. positive pressure between classified areas, while areas with volatile or airborne radiopharmaceuticals may need negative pressure per your RAM license.
Can a hot-cell be certified with the CETA guide?
Where a hot-cell or PEC configuration doesn't fit current CETA standards, USP <825> allows other equivalent means of certification, documented per facility SOPs. The PEC must still maintain ISO Class 5 equivalent particle counts and be protected from less-controlled air.
Need quotes? Request quotes with one form →
Are you a certification or testing company? Join as a provider →